Introduction

Dashcam hardwire kit installation might seem complicated, but it’s actually a straightforward process when handled by professionals. Rather than struggling with fuse boxes, cables, and voltage testers on your own, Pro Car Sound & Security can professionally install your dashcam system with a hardwire kit that enables parking mode features.

Their professional installation ensures your dashcam receives continuous power without draining your vehicle’s battery. Pro Car Sound & Security not only provides expert dashcam hardwire kit installation services but also offers a selection of quality dashcam models to choose from.

Their inventory includes the Red Tiger F7NP, Momento M8, and the Rydeen R10-SLP Mirror dashcam systems. Each model comes with different features to suit various needs, and their technicians can help determine which system works best for your vehicle and requirements.

Essential components and preparation

Before starting your dashcam hardwire kit installation, it’s crucial to understand what components you’ll need and how to prepare properly. Having the right tools and knowledge will make the installation process much smoother and safer.

Understanding dash cam hardwire kits

A dashcam hardwire kit is a set of cables and components that connects your dash camera directly to your vehicle’s electrical system. This provides continuous power without using the cigarette lighter socket. The typical hardwire kit includes three main wires: a battery wire (constant power), an ACC wire (accessory power), and a ground wire.

Most kits also feature a voltage regulator that protects your vehicle’s battery from draining completely. This is essential for using parking mode features on dash cameras like the Red Tiger F7NP or Momento M8 models.

Pro Car Sound & Security offers professional dashcam hardwire kit installation services, ensuring these kits are connected properly to your vehicle’s electrical system without risk of damage.

Identifying and accessing the fuse box

The fuse box is where you’ll connect your hardwire kit to your vehicle’s electrical system. Most vehicles have two fuse boxes: one under the dashboard and another under the hood. For dashcam hardwire kit installation, you’ll typically need to access the interior fuse box. This is usually located under the dashboard on either the driver’s or passenger’s side.

Before attempting to locate the fuse box, consult your vehicle’s owner manual. It contains detailed information about fuse box locations and fuse layouts specific to your vehicle. Look for removable panels or covers labeled “fuse box” or with a fuse symbol. A circuit tester can help identify which fuses are constant power (always on) and which are switched power (on only when the ignition is on).

Selecting required tools and accessories

For a professional dashcam hardwire kit installation, several essential tools and accessories are needed. These include:

• Fuse taps or add-a-fuse adapters: These allow you to connect to the fuse box without cutting wires.
• Fuse puller: Makes removing fuses safer and easier.
• Needle-nose pliers: Helpful for handling small components.
• Electrical tape: For insulating connections.
• Zip ties: Keeps wires neatly organized.

Additional useful tools for dashcam hardwire kit installation include a multimeter for checking voltage, a trim removal tool to access panels without damage, and a wire stripper for preparing connections.

Pro Car Sound & Security uses professional-grade tools when installing dashcam systems like the Rydeen R10-SLP Mirror. Their technicians are trained to work with various vehicle makes and models, ensuring proper installation without damaging your vehicle’s electrical system.

Guide to dashcam hardwire kit installation

Installing a dashcam hardwire kit provides continuous power to your device and enables parking mode functionality. This process involves connecting to your vehicle’s electrical system through the fuse box rather than using the cigarette lighter socket.

Locating and testing fuse slots

The first step in dashcam hardwire kit installation is finding the right fuse slots in your vehicle. Locate your car’s fuse box, which is typically under the dashboard or in the glove compartment.

Use a circuit tester to identify which fuses are “constant” (always powered) and which are “switched” (powered only when ignition is on). The constant fuse will power parking mode when your car is off, while the switched fuse ensures your dashcam only records while driving.

Make note of available fuse slots that match your needs. Most dashcam hardwire kits require both types of connections for full functionality. Pro Car Sound & Security can help identify the correct fuses for your specific vehicle model, ensuring proper installation.

When performing a dashcam hardwire kit installation, be careful not to choose fuses that power critical safety systems like airbags or engine management to avoid any potential risks.

Setting up the fuse tap and ground connection

With fuse slots identified, it’s time to set up the fuse tap connections. Most hardwire kits include add-a-fuse adapters that allow you to connect to the fuse box without disrupting existing circuits.

Remove the selected fuses and insert them into the add-a-fuse adapters. Then place these adapters back into their original slots. Connect the red wire to the switched fuse and the yellow or black wire to the constant fuse.

Next, secure the ground wire (usually black) to a metal point on the vehicle’s chassis. This creates a complete circuit. Look for existing screws or bolts that connect directly to metal.

The voltage regulator included in quality hardwire kits like the ones installed by Pro Car Sound & Security prevents battery drain during parking mode by cutting power when voltage drops below a safe threshold.

Routing cables and ensuring safe connections

Proper cable routing is crucial for a clean, safe dashcam hardwire kit installation. Start by planning a path from the fuse box to where your dashcam is mounted. Use the vehicle’s trim pieces and headliner to hide cables. Carefully tuck wires behind these panels using a plastic trim tool to avoid damage. Keep wires away from moving parts and airbag deployment zones for safety.

For dashcams with rear cameras like the Red Tiger F7NP or Momento M8, route cables through rubber conduits between the door and frame when possible. This provides protection from wear.

Secure all connections with electrical tape or heat shrink tubing to prevent shorts. Pro Car Sound & Security technicians are trained to route cables safely without interfering with vehicle functionality or appearance.

Testing power supply and parking mode

After completing the dashcam hardwire kit installation, thorough testing is essential. Start your vehicle to verify the dashcam powers on with the ignition. Turn off the engine and check if parking mode activates properly. The Rydeen R10-SLP Mirror and other models should transition smoothly between driving and parking modes.

After completing the dashcam hardwire kit installation, test all camera angles and connections thoroughly. Ensure the voltage regulator is working by monitoring battery levels during extended parking. A properly installed system will protect your battery from excessive drain and keep your dashcam running smoothly.

If issues arise during testing, professional installers at Pro Car Sound & Security can troubleshoot the connections and settings. They ensure your system provides reliable surveillance both while driving and when parked, giving you complete protection.

Transform your ride today with Pro Car Sound & Security

Revamp your driving experience with Pro Car Sound & Security! Our expert team is dedicated to delivering top-quality automotive services that keep your vehicle in excellent condition, ensuring safety and optimal performance on every journey.

With Pro Car Sound & Security, you don’t have to settle for less when you can have the best. Our commitment to excellence ensures you receive the highest quality services, tailored to your needs.

Visit Pro Car Sound & Security today and let us elevate your ride with unmatched quality and service. Click now to take advantage of our special offer: a free consultation on your first visit!

Install today and pay later with 0% interest. Call now to schedule your appointment and experience the difference! Your perfect drive starts here, with Pro Car Sound & Security!

Ready to enhance your vehicle’s convenience and security? Discover reliable services with Pro Car Sound & Security. Enjoy personalized support and advanced features like smartphone compatibility, along with peace of mind through warranty coverage!

Conclusion

Installing a dashcam hardwire kit provides a clean, professional look while ensuring your dashcam operates reliably. The proper dashcam hardwire kit installation eliminates dangling wires and allows for parking mode functionality, giving you peace of mind when your vehicle is unattended.

For the best results, trust professionals like Pro Car Sound & Security to handle your dashcam hardwire kit installation. They offer expert installation services and carry quality models from Red Tiger, Momento, and Rydeen. Their experienced technicians can ensure your system works correctly while maintaining your vehicle’s warranty and electrical system integrity.